0 item(s) - $0.00

Ford

Flathead Ford Right Hand Exhaust Manifold 21A 9430, 1948 - 1952 pick up and 1942 - 1948 passenger

Flathead Ford Right Hand Exhaust Manifold 21A 9430, 1948 - 1952 pick up and 1942 - 1948 passenger

Good used, casting number barely visible 21A-9430. Fits Flathead Ford V8 1942 - 1948 passenger and 1..

$250.00

Flathead Ford Right Hand Exhaust Manifold 8CM 9430

Flathead Ford Right Hand Exhaust Manifold 8CM 9430

Good used, casting number highly visible, good inlet and outlet studs. Fits 1949, 1950, 1951 Mercury..

$155.00

Flathead Ford Rod, NOS 48-6200 for 1935-1938

Flathead Ford Rod, NOS 48-6200 for 1935-1938

Flathead Ford 48- rod, new, Ford. Forging 48E 6205.  Part Number 48-6200 for 1935, 1936, 1937, ..

$45.00

Flathead Ford Starter Support Bracket Used 81A 11140-B and 8A 11140

Flathead Ford Starter Support Bracket Used 81A 11140-B and 8A 11140

Good used Flathead Ford starter support bracket 81A-11140-B and 8A-11140..

$10.00

Flathead Ford Timing Cover Fits 49 - 53 pass and pickup

Flathead Ford Timing Cover Fits 49 - 53 pass and pickup

Good used Cast Iron 7RT and 8BA Timing Cover for Ford truck, Ford and Mercury passenger 1949, 1950, ..

$35.00

Flathead Ford Two Sheave Crankshaft Pulley, 1950 - 1953

Flathead Ford Two Sheave Crankshaft Pulley, 1950 - 1953

Good used.  Fits 1950, 1951, 1952, 1953 Flathead Ford V8 in Ford & Mercury passenger.  Ford part..

$95.00

Flathead Ford Used 1948 - 1949  Pick Up, 1949 Passenger Crankshaft Pulley

Flathead Ford Used 1948 - 1949 Pick Up, 1949 Passenger Crankshaft Pulley

Good used; fits 1948, 1949 Pick Up and 1949 Passenger with Flathead Ford V8.  It includes seal surfa..

$110.00

Flathead Ford USED crank pulley nut 81A-6319

Flathead Ford USED crank pulley nut 81A-6319

Good used Ford  crankshaft pulley nut.  1 1/8" hex crank nut, Ford calls it a ratchet (for crankshaf..

$10.00

Flathead Ford used fuel pump stand 8BA 9415

Flathead Ford used fuel pump stand 8BA 9415

Good used 1949 - 1953 Ford and Merc V8 fuel pump stand Part Number 8BA-9415, Casting Number 8BA-9416..

$30.00

Flathead Ford Used Generator Attaching Nut 33848-S7

Flathead Ford Used Generator Attaching Nut 33848-S7

Good used Ford generator attaching nut 9/16-18 special, extra long.  Ford part number 33848-S7...

$8.00

Flathead Ford Used large crank pulley nut B-6319-A

Flathead Ford Used large crank pulley nut B-6319-A

Used Ford large crank pulley nut.  1 3/8" hex crank nut, Ford calls it a ratchet (for crankshaft cra..

$10.00

Flathead Ford Used Transmission to Bell Housing Adaptor

Flathead Ford Used Transmission to Bell Housing Adaptor

Used adaptor from straight back bell housing 1942 - 48 Ford Industrial V8 engine to standard 8 bolt ..

$100.00

Flathead Ford Used Two Sheave Crankshaft Pulley, 1950 - 1953

Flathead Ford Used Two Sheave Crankshaft Pulley, 1950 - 1953

Good used - this pulley was cracked and braze repaired.  For 1950, 1951, 1952, 1953 Ford V8 pas..

$55.00

Flathead Ford Used Two Sheave Crankshaft Pulley, 1950 - 1953

Flathead Ford Used Two Sheave Crankshaft Pulley, 1950 - 1953

Used - this pulley is cracked badly and could be braze repaired.  For 1950, 1951, 1952, 1953 Ford V8..

$20.00

Flathead Ford Used Vacuum Line for Distributor 21A-12226

Flathead Ford Used Vacuum Line for Distributor 21A-12226

Used vacuum line for distributor vacuum brake, 8 cyl.  21A 12226 Tube.  20 7/8" long.  Has banjo fit..

$30.00

Flathead Ford V-8 crankshaft core 1939 - 1946

Flathead Ford V-8 crankshaft core 1939 - 1946

Uses 81A main bearings, 81A rod bearings, and 91A or 21A rods.  Needs to be reground.   Uses labyrin..

$50.00

Flathead Ford V8  Cylinder Head EAB 6050

Flathead Ford V8 Cylinder Head EAB 6050

Ford Flathead Ford V-8 cast iron cylinder head, used,stock. EAB 6050 Left or Driver Side.  Hot tanke..

$125.00

Flathead Ford V8 crankshaft core 1932 - early 1936

Flathead Ford V8 crankshaft core 1932 - early 1936

 At -.010 with wear both rods and mains; needs to be reground. for 1932, 1933, 1934, 1935, 1936  Pas..

$100.00

Flathead Ford V8 crankshaft core 1949 - 1953

Flathead Ford V8 crankshaft core 1949 - 1953

 Needs to be reground; most will clean at 20-20 or better. Uses rope seal. For 1948(trucks), 1949, 1..

$95.00

Flathead Ford V8 crankshaft core at .010/.010 1949 - 1953

Flathead Ford V8 crankshaft core at .010/.010 1949 - 1953

 Needs to be reground. -.010 on Mains and Rods; should clean at .020/.020; Uses rope seal. For 1949,..

$95.00

Showing 81 to 100 of 700 (35 Pages)